In the wire drawing industry, choosing a suitable and high-quality wire drawing die is the most important and critical part that affects the quality and output of wire drawing products.
Wire drawing die manufacturers produce all kinds of diamond dies for drawing such as tungsten carbide die, polycrystalline, synthetic single crystal, natural diamond, painted, stranded wire, nano, etc.
Factory direct sales of 0.1-60mm stranding die are used for bundling/stranding/compacting of high, medium and low voltage cables.
Nano coated die is a CVD diamond film coated on the surface of tungsten steel die, which is suitable for stranded wire and drawing non-ferrous metals such as copper, aluminum, carbon steel, stainless steel, etc.
Our factory produces various types of wire drawing dies, including standard wire drawing dies, PCD wire drawing dies, ND wire drawing dies, TC wire drawing dies, enamel wire drawing dies and special-shaped wire drawing dies.
The wire drawing die factory provides finished wire drawing dies, semi-finished wire drawing dies and wire drawing dies maintenance and customization services.
Nano coated die Size range: 0.80 to 60mm. Compared with PCD and tungsten carbide, it can improve raw material utilization by 3-4% and better service life.
The nano mold can be used for all wet and dry drawing processes, especially for occasions with large size, demanding wear requirements, but not strict requirements on surface finish
Nano diamond coated die, referred to as NDCD mold, also known as CVD diamond coated mold. Die size is optional from 0.7mm to 60mm; Coating thickness: 30um;
Compared with other molds, nano die can achieve lower friction and better utilization of copper and aluminum when drawing copper wire. Better surface finish.
The wire drawing dies produced by 3 Better Factory for bunching, stranding and compaction processes have good profiles and highly polished surfaces, which can achieve ultra-high cable performance and quality.
Nano Diamond coated strand die Compacting Die for electrical transmission strands, copper strands and aluminium strands.
NDCD Stranding Dies has very high wear resistance, and the hole size does not change during wire drawing production. Compared with tungsten carbide die, the die life is about 10 times (or more)
Stranding die factory Customized 4.70-15.70mm compacting die for stranding the cable with nano coated stranded wire
The surface finish of the cable drawn by the nano strand mold is good, the cable size is consistent, and there are no defects and burrs.
Drawing cable wires with nano diamond coating compacting dies can improve the electrical performance of the cable and prolong the service life of the cable.
Compared with other tools such as tungsten carbide or PCD, the nano coated mold has a smoother surface finish, which can minimize the mold tension and improve the efficiency of the stranding machine.
Wire and cable are generally made of copper. At room temperature, wire drawing equipment is used to draw through one or several holes of the die to increase the length, reduce the section and improve the strength,
Diamond Drawing Die Manufacturer Wholesale Supply Nano Coated Die Stranded compacting Die Drawing Stranded Wire Specification Range 0.5-80mm
The nano diamond coated wire stranding die is made by coating the nano diamond film on the working surface of the die (tungsten carbide substrate) through chemical vapor deposition (CVD)
The nano drawing dies we produce are widely used in wire, cable, welding wire, steel wire, various special-shaped pipes and wires and other industries.